Speb7 Adhesive
  Home   About us     Videos   FAQs   Enquiry   Contact   Careers   Sitemap  
SPEB-7 SPRAY GRADE is specially developed for industries like upholstery; bus body where the quantity of adhesive used is high, in order to get better coverage, faster production, high bonding strength and faster bonding.
Speb7-Spray Grade
SPEB-7 SPRAY GRADE is suitable for bonding materials to each other like foam to rubber, coir to canvas, as well as wood to plywood in the making of furniture like sofas, chairs and mattresses.
Speb7-Spray Grade   Speb7-Spray Grade   Speb7-Spray Grade
Application Industries
UPHOLSTRY. ( CHAIR / SOFA Manufacturing)
BUS BODY ( Vinyl to Plywood / Hat-Rack / and other areas)
Method of Use
Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Spray the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just “dry to touch”. Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining.


Note :
Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the porosity of the surface.
Precautions :
SPEB-7 SPRAY GRADE should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.
Features and Benefits :
1. Sprayable adhesive ensures productivity and superior coverage
2. High heat resistant
3. Good initial grab and fast bonding
4. Does not contain benzene
Pack Sizes :
5Ltr, 25Ltr.