Speb7 Adhesive
  Home   About us     Videos   FAQs   Enquiry   Contact   Careers   Sitemap  
 
PRODUCTS NATIONAL FWG-711 << back
SPEB-7 FWG-711
SPEB-7 FWG-711 grade has been specially developed for the footwear industry.
Speb7-FWG-711 Speb7-FWG-711
Application
SPEB-7 FWG-711 is suitable for fixing inner linings : leather to leather, leather to insole , insole to midsole and socks to insole. It is also suitable for bonding soles made of neolite rubber, leather, microcellular rubber to uppers made of leather, rubber and synthetic fabric.
Speb7-FWG-711   Speb7-FWG-711   Speb7-FWG-711   Speb7-FWG-711
Method of Use
Speb7-FWG-711
Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Apply the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just “dry to touch”. Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining.

 

Note :
Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the porosity of the surface.
 
Precautions :
SPEB-FWG-711 should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.
Features and Benefits :
1. Better productivity and high coverage
2. Excellent bonding strength for high-stress shoes and sandals
3. No settlement
4. Does not contain benzene
 
Pack Sizes :
500 ml, 1Ltr, 5Ltr, 25Ltr.